Products

Product Description

ShockTec digital shock detectors provide reliable 24 hour perimeter protection. A break-in is detected as soon as the intruder attempts to force, smash, drill or even saw through the protected window, door, wall or roof. This means that the alarm is activated whilst the intruder is still outside, minimizing damage to the premises and its contents, and maximizing personal security.

ShockTec detects gross attacks and provides an exceptional level of discrimination between real attacks and background vibrations. An advanced digital microprocessor with Intelligent Digital Signal Processing accurately analyzes the vibration signal from the piezo-electric sensor. The DSP methods include analysis of signal frequency, energy, amplitude and duration.

The ShockTec has a built-in calibration method that is accurate and reliable. Indications to the installer include oversensitive, under-sensitive or correctly calibrated conditions.

• Supply voltage - 9V - 16V DC
• Current consumption (typical) - 12.5 mA
• Operational temperature - -200C to 600C
• Maximum humidity - 95% non-condensing
• Sensitivity setting - Dual stage potentiometer
• Tri-colour LED indicator -
• Orange - Over-sensitive.
• Green - Alarm and correct calibration.
• Red - Under-sensitive.
• Contact ratings -
• Alarm relay 100mA at 24VDC, NC.
• Tamper relay 500mA at 24VDC, NC.
• Alarm time - 2.5 seconds
• Latching modes - Any or 1st to latch operation modes
• Max no. of units on Any Latch loop - 80
• Max no. of units on 1st to Latch loop - 10.
• False alarm protection - Digital microprocessor signal processing and noise reduction with maximum ground plane.
• Electrostatic discharge - No false alarms up to 8kV.
• RF immunity - 40 V/m from 80MHz to 1GHz.
• Enclosure material - Flame retardant ABS.