Products

Product Description

The LB-CA50-KIT from SWIT This battery kit is designed for powering C200/C300 Mark II/C200B via a D-tap to LEMO cable. This kit includes 2x LB-CA50 Batteries, 1x PA-B2L4 D-tap to LEMO cable and 1x PC-U130B2 charger. LB-CA50 battery has one D-tap DC out socket for attaching the D-tap to LEMO cable(PA-B2L4) then plugs this cable into Canon camera's DC-IN port to power Canon cameras.

LB-CA50 is the replacement battery for Canon BP-A60 battery, power Canon EOS C300mk2 and C200 cameras via additional D-tap to camera DC-IN cable .

With 14.4V nominal voltage, the LB-CA50 has 73Wh / 5.1Ah capacity and can run approx. 6 hours on Canon EOS C300mk2 camera when LCD monitor is on.

The special D-tap cable PA-B2L4 is for LB-CA50 battery to power Canon EOS C300mk2 and C200 cameras.

The LB-CA50 can only be charged via D-tap socket. SWIT provides the Dual D-tap heads 3A portable charger PC-U130B2 to charge LB-CA50 battery. It takes 3 hours and 30 minutes to charge 2 LB-CA50 batteries from 0 to 100%.

• 2 Li-Ion Battery Kit for Canon C200 & C300 Mark II
• LB-CA50 Battery: 73Wh/5.1Ah
• 4-level LED power indicator One 14.4V D-tap DC out socket
• 5V/1A USB charing port
• PA-B2L4: D-tap to LEMO cable with an additional D-tap out socket
• PC-U130B2: D-tap charger 2-ch D-tap intelligent charger
• Charging two PB-CA50 batteries to full less than 4 hours
• 14.4V, 73Wh/5.1Ah
• Max output: total: 50W/3.5A, via D-tap 50W/3.5A, via USB 5W/1A
• 2-ch portable D-tap intelligent charger
• Input: AC 100V-240V at 50/60Hz
• Output: DC 14V-16.8V, 3A
• Applicable battery: Battery with D-tap socket
• Dimension: 110+50+32mm

• LB-CA50 battery x2 PA-B2L4 D-tap to DC cable x1 PC-U130B2 dual D-tap heads charger x1