Products

Product Description

The Magma 2211093-02 expansion link kit allows the extension of the PCI Express signals from a host server to an external expansion backplane or chassis. The Magma 01-04978-03 interface card installs into any x8 or x16 PCIe slot in the host computer motherboard and a second Magma 01-04978-03 interface card can be inserted into any upstream PCIe slot. A high-speed iPass cable allows data transfers to and from the host computer at 40Gbp.

Multiple LEDs and dip switches make debugging and troubleshooting easy. Visible LEDs show the PCIe link width that each PCIe interface card is operating. Other LEDs for "Loss of Lock," "Reset ON" and "Clock Good" are useful visual indicators for troubleshooting and verifying the connection without expensive software diagnostic tools.

A test fixture can be created that connects a SuperMicro server to an 8 slot PCIe expansion backplane. With the server you can connect eight test fixtures and therefore can test sixteen solid state drives simultaneously. The server runs a routine to test each card in sequence and either accepts or rejects it. The PCI Express Expansion Link Kit is used to connect the test fixture to the server at 40Gbps.

• HD-One DX Transmitter Only Extend HDMI - 4K UHD
• High-speed x8 PCI Express connection
• Low profile bracket provides for easy installation in low profile computers
• Easily visible LEDs indicate correct installation and PCIe link width
• Low power consumption - less than 4 Watts
• LEDs show status of connection for quick debug- reset indicator, clock indicator, link width indicator
• Supports Spread Spectrum Clocking, LOS , LOL
• Low Latency and Low Jitter
• PCIe Link Cards Form Factor: x8 PCIe, low-profile, half-length
• LED Indicators: PCIe link width, reset, clock; PCI Express Specification Rev 2.1
• Cable: 1-meter or 3-meter lengths
• Length: 139.7mm
• Width: 12.7mm
• Height: 69.9mm
• Operating Temperature: -20to 75C
• Storage Temperature: -40to 100C
• Operating Humidity: 10% to 90% non-condensing
• Hardware Requirements: PCIe x8, x16 Slot
• Power Requirements: 1.2A @ +3.3V maximum; 3.96 Watts
• Latency: Gen 1 1200W PSU; Gen 2 600 ps
• Re-timers: Gen - 1 2.5 Gbps, 4 lane equalization, reduced total jitter; Gen - 2 5.0 Gbps, 4 lane Equalization, de-emphasis and reduced total jitter to further improve the channel
• Supported Operating Systems: Windows; Mac OS X; Linux; Solaris

• x8 iPass connector Jumpers for configuration Status LEDs x8 iPass cable