Products

Product Description

The DSP100 is an affordable amplifier with fully integrated DSP designed optimize the speakers and acoustical limitations of a zone. The DSP100 in three versions, a 1x100W 70/100V, 2x100W 70/100V, and 2x100W at 4/8 Ohms. The robust, full function DSP includes 3 gain stages, filtering, compressors, limiters, parametric EQ and more. A USB port makes programing simple, fast and repeatable for large installations. The optional factory installed Dante card allow for up to 2 channels of networked audio to be routed to the amplifier and through the DSP.

• Onboard full featured DSP
• Configurable via USB port
• Dante interface
• 1/2 rack chassis & convection cooled
• Remote Volume Control

• Output Power: 1 x 100W at 70 or 100V
• Output: 100W x 1 at 70V / 100V
• Frequency Response: 100 Hz - 20 kHz
• THD+N: <.1% Full Power
• Signal-to-Noise Ratio: >100dB
• Input Sensitivity: 1V
• Input impedance (Balanced/Unbalanced): 7.2K ohm/3.6K ohm
• Current Draw - Standby, 1/8 Power: 12W/65W
• Amplifier Class: D
• Remote Volume: 0-10V DC
• External Mute: Contact-Closure
• Input Connectors: 3.5 mm Euroblock and RCA
• Output Connectors: 5 mm Euroblock
• LED Indicators: Power, Standby, Signal, and Clip
• Controls: USB for programming, Remote Volume, Trim Knobs
• Optional Network Input: Dante
• Power Supply Input: 110/240V AC, 50/60 Hz
• Cooling: Convection-Cooling
• Construction: Aluminum Chassis
• Mounting: Rack-Mountable
• Weight: 4.55 lbs