Products

Product Description

The PoE+ Amplifier Series leverages the higher power 802.3at PoE+ standard to power two amplifier models, the AV8-2-LZ and the CVA16-1-CV. These compact amplifiers are designed to be single cable solutions. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. Simply plug the PoE+ CAT 5e/6 cable into the amplifier, wire the speakers and route audio and repeat for the next zone. The plenum rating and compact size, allow this amplifier series to be placed in the air handling space, closets, the equipment rack or any other convenient space. The confluence of readily and inexpensive CAT 5e/6 cabling, Dante networked audio and quick installation, make this amplifier series an essential problem solver.

• Single cable Dante amplifier solution
• 4/8 Ohm and 70V/100V models
• Plenum rated
• Dante network interface
• Compact flanged enclosure for easy mounting under tables, closets & plenum

• Output Power: 16W x 1 at 70 or 100V
• Output Connectors: 5 mm Euro Block
• Construction: Aluminum Enclosure
• Mounting: Flange Mount Enclosure
• Cooling: Convection-Cooling
• Output Power: 16W rms x 1 70V/100V
• Frequency Response: 100 Hz - 20 kHz (70V/100V)
• THD+N full Frequency and Power: <0.3%
• THD+N 1 kHz and Full Power: <0.05%
• Signal-to-Noise Ratio: >88dB
• Channel-to-Channel Separation: >85dB
• Noise Floor: -95dBV
• Amplifier Class: D
• Input Connector (Dante Audio & DC): RJ-45
• Weight: 1.15 lbs