Products

Product Description

The RCF NXL 24-A is an active column speaker array system composed by 4 x 6" high power woofers and a 2.5" voice coil compression driver loaded from a waveguide on a 100 x 30 constant directivity horn. This particular design permits coherent sound dispersion minimizing lobing in a very compact enclosure.The wide coverage horizontal angle and the controlled vertical dispersion allow correct sound reproduction serving a wide area and assistance in limiting feedBack and reverberated sound.The amplifier delivers 1400 Watt and is controlled by a DSP that takes care of crossover, equalization, phase alignment, soft limiting and speaker protections. Equalizations are to operate with a single column or in

All Compression drivers and Transducers are precision built taking advantage of RCFs superior moulding, assembly technologies and a wealth of professional knowledge and experience dedicated to achieving extremely high standards.The NXL 24-A is powered by a 1400W peak power digital amplifier, split 400W for the HF and 1000W for the LF. A new generation DSP handles all the processing within the cabinet and allows adjustment for a single column application or HF close coupling application.NXL 24-A amplifier deliver ultra fast attack, realistic transient response and impressive audio performance. It presents SMPS power supply section in order to produce maximum output and minimum transportation weight. A useful Mic/Line switch to adjust the input sensitivity is provided. When used just for speech, the Mic setting allows to use a microphone directly with the speaker. The cabinet is equipped with four rubber protections and two aluminum side handles for rental use and easy transportation. NXL 24-A cabinets are in Baltic Birch Plywood enclosure with internal structural metal bracings offering the maximum reliability and strength for an intensive use.

• 131 dB max SPL
• 65 Hz 20 kHz frequency response
• Baltic Birch Plywood enclosure with internal structural metal bracings
• 2.5" voice coil RCF Precision C. Driver on waveguide
• DSP controlled Input section with single or dual eq. preset
• Pole mountable, Stackable, Flyable

• Power Supply

• Frequency Response: 65 Hz - 20000 Hz
• Max SPL: 131 dB
• Horizontal Coverage Angle: 120
• Vertical Coverage Angle: 30
• Compression Driver: 2" 2.5" v.c
• Input Signal (Impedance): Jack- XLR male
• Input/Output connector: XLR female
• Crossover frequencies: 800 Hz
• Protections: Thermal, RMS
• Limiter: Soft limiter
• Power supply: switching 1400 Watt Peak 700 RMS
• High frequencies: D / 400 Watt Peak 200 RMS
• Low frequencies: D / 1000 Watt Peak 500 RMS
• Cooling: Convection
• Connection: Powercon in-out
• Width: 7.90"
• Depth: 10.79"
• Hardware: 1 x M10 top, 1 x M10 bottom, 3 x M6 bottom
• Colour: Black
• Handles: 1 top, 2 side
• Weight: 62 lbs