Products

Product Description

The D6203A/75+RM comprises a D6203A analog to AES/EBU digital audio converter and a T6302A rear module, for 75 Ohm installations. It provides analog to digital audio conversion, along with AES/EBU signal distribution.The D6203A supports audio sampling frequencies from 30 kHz to 192 kHz. It converts the incoming stereo analog audio signal to an AES/EBU digital audio signal using 24 bit conversion technology. The D6203A is housed in the openGear OG3-FR-C series frames and can be configured and monitored through DashBoard.The D6203A can be used in either 75 Ohm unbalanced installations (using the T6302A rear module) or 110 Ohm balanced installations (using the T6303A rear module). A T6302A rear termination module is included as part of the D6203A/75+RM package.

• Analog stereo to AES/EBU digital audio converter
• Provides multiple copies of the AES/EBU signal for distribution
• Supports audio sampling frequencies from 30 kHz to 192 kHz
• Uses 24 bit conversion technology
• Can be used in 75 Ohm or 110 Ohm installations by choosing the appropriate rear termination module

• Input Level: +4 dBu
• Input Impedance: greater than 20K Ohms
• Stereo Separation: 100 dB, 20 Hz to 20 kHz THD+N: < 0.01%
• Noise (unweighted): -84 dBu ,20 Hz to 20 kHz
• Frequency Response: +/-0.2 dB, 20 Hz to 20kHz
• Output Level: 2.5V p-p nominal
• Output Impedance: 75 Ohm unbalanced (T6302A and T6402A): 110 Ohm unbalanced (T6303A and T6403A)
• Resolution: 24 Bit
• Jitter: Less than 5 ns
• Sampling Frequency Rate: 30 kHz to 192 kHz
• Power Requirements: +12 V @ 330mA
• Weight: 2 lbs