Products

Product Description

AA6201A+RM is a combination package comprising an AA6201A audio distribution amplifier and a T6303A rear termination module. This combination allows the AA6201A to be used as a 1 x 8 distribution amplifier or a dual 1 x 4 distribution amplifierThe AA6201A is an analog audio distribution amplifier housed in openGear series frames. It can be used as a mono or two channel (stereo) audio DA. As a mono DA it can provide eight copies of the single (mono) input signal. As a two channel (stereo) DA it can provide four copies of the stereo inputs. For maximum output capability the T6303A rear termination modules are used.

• Analog audio distribution amplifier
• Used as either a mono or two channel (stereo) audio DA
• Mono DA provides eight copies of the single (mono) input
• stereo mode provides four copies of the two (stereo) inputs
• Maximum output capability requires T6303A rear assemblies
• High density installations can use the T6403A rear assembly to provide up to 20 1 x 4 mono audio DAs in the OG3-FR-C frame
• Ultra high stereo capacity can use the T6406 rear assembly to provide two 1 x 3 stereo audio DAs per slot
• Can be addressed through Dashboard to report card status

• AA6201A
• T6303A
• Mounting Screw
• 10 three pin male plugs

• Maximum Input Level : - +26 dBu
• Input Impedance : Greater then 20K Ohm balanced
• CMMR : Greater than 70dB, 20Hz to 20kHz
• Maximum Output Level : - +26 dBu
• Output Impedance : 60 Ohm balanced
• Output Isolation : Greater than 60dB
• Harmonic Distortion : Less than 0.01%
• Frequency Response : 0.1dB from 20Hz to 20kHz
• Gain : 14dB to +18dB continuously variable
• Noise : Better than 95 dBu, 20Hz to 20kHz at unity gain
• Weight: 2 lbs