Products

Product Description

The front panel of the DS-RT2 features two pushbuttons with two associated LEDs. Upon initial power-up, the OFF mode is selected. Touching the other button de-selects OFF and immediately selects ON. An LED adjacent to each button shows which mode is selected. In a typical installation, the DS-RT2 may be used to turn an audio or video source on or off. To turn on an audio source, the DS-RT2 may be connected to an RDL ST-SSR1 or ST-RX2 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. In each of the above examples, only one output terminal is needed for triggering, therefore a single shielded pair (3-conductor cable) is required for remote connection. For more complex switching networks, both outputs (ON and OFF) may be used. In an audio or video control installation, the DS-RT2 may be mounted adjacent to an RDL remote volume control, such as the D-RLC2, D-RLC3 or RLC10K.

• Remote Selection of ON or OFF
• Single-Button Selection for Each Function
• Open-collector Switching
• 3-wire or 4-wire Remote Wiring
• Professional Aesthetic Appearance
• Companion to other RDL Remote Controls
• LED Indication

• Indicators (2): Green/Red LEDs, (indicates status ON or OFF respectively)
• Weight: 0.38 lbs