Products

Product Description

Balanced or unbalanced isnt the question here. BALUS stands for Balanced-Unbalanced. Due to the stereo TRS jacks used in the PLI05, it can cope with both balanced and unbalanced signals. The PLI05 is so to say the PLI02s little sister. Both boxes can be used to convert balanced to unbalanced and both use so called line isolating transformers to realize a galvanic separation. They are connected between mains powered devices to reliably prevent ground loop hum. The PLI02 was designed for use with XLR connections and for low impedances (600 Ohms). The PLI05 on the other hand with its jack connector is better for higher impedances. It covers a wide range from 600 Ohms to over 10 k Ohms. The attached diagrams for harmonic distortion, frequency- and phase characteristics demonstrate this quite clearly. To prevent loss of level make sure that your input impedance is not higher than the output impedance. Both devices are suitable for high levels of up to Plus 20dBu.

• Line Isolation Box 2 Channel
• For balanaced and unbalanced signals Plus Can tranform unbalanced signals to balanced

• Material: Polyethylene
• Flammability Rating: Hb
• Temperature Range: -40°F - 122°F
• Length Per Reel: 100 ft.
• Input Impedance: 10K ohm
• Maximum Input Level: Plus 6 Dbu