Products

Product Description

With the NetMedia Video Sequencer (4 Input To 4 Output), you can deliver four video inputs to four different outputs and customize setup for a variety of applications. As both a video switcher and splitter, this microprocessor controlled Video Sequencer allows you to show either a single input or a rotating combination of inputs on each output. It’s perfect for delivering video from a variety of CCTV cameras, including NTSC or PAL color cameras, and B/W cameras.

• Manual or automatic switching.
• Supports NTSC or PAL in color and B/W.
• Setup retained during power outage.
• Tough aluminum housing.

The selected inputs and combinations may be the same or different for each output. To use the sequencer as a 4-way video distribution amplifier, set up Input 1 as the only source for all four outputs. To set up one or more outputs as a sequencer, enable multiple inputs and select rotation mode. To set up one or more outputs as a manual switcher, deselect rotation mode and choose the desired input.

• Video Switcher Assembly (4 Video Input Connectors, 4 Input LEDs, Input Select Button, Rotation LED, 4 Video Output Connectors, 4 Output LEDs, Output Select Button, Dwell Time LED, 10 Sec/Plus Button, 1 Sec/Minus Button, Label Area, Power Connector, Factory Pins).
• 12 V DC 300mA Power Transformer (Center Conductor Positive).

• Dwell Time - 1 to 255 seconds.
• Video Bandwidth - 12 MHz.
• Video Crosstalk - (-70) db.
• Video Output Connector - 4 Female RCA, 75 Ohm.
• Video Input Connectors - 4 Female RCA, 75 Ohm.
• Power Requirement - 12 V DC, 300mA.
• Power Connector - 5.5 mm OD, 2.1mm ID, center positive.