Products

Product Description

This X10 Powerflash Interface allows almost anything to send X10 signals. The plug-in unit sends an X10 signal to receiver devices when a contact closure is made or low-voltage (6-18V AC, DC or Audio) is applied to its terminals.

The PowerFlash Interface sends an X10 Signal in response to a "Make or Break" contact from a security panel, driveway sensor, doorbell, magnetic door/window switch, you name it! If it’s got an output, it can probably trigger the PowerFlash. The Module can be activated by a low voltage output or a dry contact switch closure. Upon activation, the PSC01 sends an X10 On signal. The module becomes deactivated when the low voltage is removed or the dry contact switch is opened and an Off type Signal is sent.

• 120 VAC.
• 60 Hz.
• 2 Watts.
• 6 Volts DC minimum; 18 Volts DC maximum.
• Indoor use only.