Products

Product Description

Features:

• The hard wired vehicle sensor lets you know any time a vehicle enters or leaves the driveway.
• The probe of the vehicle sensor detects metal objects, such as moving cars, in a ten to twelve foot radius of the sensor.
• The vehicle sensor probe should be buried parallel to or under the driveway.
• Then the direct burial wire is run back to the control box that is located in the house.
• The probe will detect vehicles moving by and send a signal through the line to the control box, which will sound a whistle.
• The probe and wire can easily be buried in turf with a shovel or a lawn edger.
• If the probe is to be buried in the middle of the drive, it is best to have the probe and wire in a conduit to protect it from any damage caused by heavy vehicles.
• If there are gophers, moles, etc., in the area, it would be best to have the entire length of wire in a conduit.
• The control box simply plugs into a 110-volt outlet, and has an on/off switch on the top of the box.
• There is a set of contacts to connect the two wires from the probe, as well as a set of 12-volt DC (500mA max) contacts.
• The voltage output can be used to operate sirens, bells, or a light timer.
• Everything is color coded and labeled for easy reference.
• The whistle and the voltage output are adjustable for 2, 4 or 8 seconds.
• The control box can run up to three probes, and has a sensitivity control so that it can be custom tuned to each application.
• Dimension : 13.25 L x 8.5 W x 9 H in.
• Item Weight : 6 lbs.